TPS70302 |
RFQ for TPS70302 |
![]() |
| Technical/Catalog Information | TPS70302PWP |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Regulator Type | Multiple Output |
| Package / Case | 24-TSSOP Exposed Pad, 24-eTSSOP, 24-HTSSOP |
| Packaging | Tube |
| Regulator Topology | Positive Adjustable |
| Current - Output | 1A, 2A |
| Voltage - Output | 1.22 ~ 5.5 V |
| Operating Temperature | -40°C ~ 125°C |
| Voltage - Input | 2.7 ~ 6 V |
| Number of Regulators | 2 |
| Current - Limit (Min) | 1.75A, 3.8A |
| Current Short Circuit (Isc) | - |
| Drawing Number | 296; 4073225; PWP; 14, 16, 20, 24, 28 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | TPS70302PWP TPS70302PWP 296 8021 5 ND 29680215ND 296-8021-5 |
| Product | Manufacturers | Pack | D/C |
| TPS70302 | - | TSSOP | 4 |
The TPS701xx family of voltage regulators offers very low dropout voltage and dual outputs with power up equence control, which is designed primarily for DSP applications. These devices have extremely low noise utput performance without using any added filter bypass capacitors and are designed to have a fast transient esponse and be stable with 10 uF low ESR capacitors.
These devices have fixed 3.3-V/2.5-V, 3.3-V/1.8-V, 3.3-V/1.5-V, 3.3-V/1.2-V, and adjustable/adjustable voltage ptions. The 3.3-V output regulator (regulator 1) can support up to 500 mA, and the other regulator (regulator ) can support up to 250 A. Separate voltage inputs allow the designer to configure the source power.
ecause the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 170 mV n regulator 1) and is directly proportional to the output current. Additionally, since the PMOS pass element is voltage-driven device, the quiescent current is very low and independent of output loading (maximum of 225 A over the full range of output current). This LDO family also features a sleep mode; applying a high signal to EN (enable) shuts down both regulators, reducing the input current to 1 A at TJ = 25°C.
The device is enabled when the
Input voltage range‡: VIN1 . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 7 V † Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and unctional operation of the device at these or any o
Features
` Dual Output Voltages for Split-Supply pplications` Selectable Power Up Sequencing for DSP pplications (See TPS704xx for Independent Enabling of Each Output)` Output Current Range of 1 A on Regulator 1 and 2 A on Regulator 2` Fast Transient Response` Voltage Options Are 3.3-V/2.5-V, 3.3-V/1.8-V,3.3-V/1.5-V, 3.3-V/1.2-V, and Dual Adjustable Outputs` Open Drain Power-On Reset With 120-ms elay` Open Drain Power Good for Regulator 1` Ultralow 185 A (typ) Quiescent Current` 2 A Input Current During Standby` Low Noise: 78 VRMS Without Bypass apacitor` Quick Output Capacitor Discharge Feature` Two Manual Reset Inputs` 2% Accuracy Over Load and Temperature` Undervoltage Lockout (UVLO) Feature` 24-Pin PowerPAD™ TSSOP Package` Thermal Shutdown Protection
Maximum Ratings
VIN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 7 V
Voltage range at EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 7 V
Output voltage range (VOUT1, VSENSE1) . . . . . . . . . . . . . . . . . . . .. 5.5 V
Output voltage range (VOUT2, VSENSE2) . . . . . . . .. . . . . . . . . . . . . 5.5 V
Maximum RESET, PG1 voltage . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 7 V
Maximum MR1, MR2, and SEQ voltage . . . . . . . . . . . . . . . . . . .. . . . VIN1
Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . Internally limited
Continuous total power dissipation . . . . See Dissipation Rating Tables
Operating virtual junction temperature range, TJ . . .. . . 40 to 125
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . .65 to 150
ESD rating, HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 2 kVSupplier
Post a Buying Lead